Cummins/Onan 205AJ — Connecting the load - manual type plant

Operation

For the Cummins/Onan 205AJ, from the Cummins/Onan operator's manual.

Applies to: Cummins/Onan AJ series

Procedure

1. Insert load plug into receptacle at side of generator.
2. Turn plug slightly right to lock.
3. Provide a ground on the plant if tools or appliances have a third wire for grounding.
4. Throw individual load switch ON.

Full service-parts list: Cummins/Onan AJ series →

Source: Cummins/Onan operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Cummins/Onan repair guides →