Cummins/Onan 1750DQKB / 3200 Series — Permanent Magnet Generator (PMG) Installation
Installation
For the Cummins/Onan 1750DQKB / 3200 Series, from the Cummins/Onan service manual.
Applies to: Cummins/Onan 1750DQKB, Cummins/Onan DFE
Procedure
- Install the complete rotor assembly to the end of the main rotor shaft using the hex head through-bolt.
- Carefully locate the stator housing to position on the generator endbracket; fasten with the 4 bolts and clamps.
- Connect the PMG wiring harness connector.
- Install the PMG assembly cover using the three M5x12mm capscrews and lockwashers, and tighten securely.
Full service-parts list: Cummins/Onan 1750DQKB →, Cummins/Onan DFE →
Source: Cummins/Onan service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.