Craftsman Marine CM4.33 / CM4.42 — Stopping the engine
Operation
For the Craftsman Marine CM4.33 / CM4.42, from the Craftsman Marine owner's manual.
Applies to: Craftsman Marine CM4.33, Craftsman Marine CM4.42, Mitsubishi CM4.33 engine, Mitsubishi CM4.42 engine
Before you start
- Never turn the electric main switch to the 'off' position when the engine is running.
- Do not turn the starter switch to the 'start' position when the engine is running.
Procedure
- Shift throttle lever back to neutral; place gearbox lever in neutral and let engine idle a few moments.
- Turn starter switch to the far left 'stop' position.
- When engine has stopped, turn key one step right to the 'off' position.
- Close the seacock of the raw water inlet and turn the main electrical switch off if engine will not be used for a prolonged period.
Specs & values
- After a long trip it is recommended to have the engine idling for a few minutes before putting it to full stop.
Full service-parts list: Craftsman Marine CM4.33 →, Craftsman Marine CM4.42 →
Source: Craftsman Marine owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.