The Mitsubishi CM4.33 is a 1.5 L idi (indirect) engine rated at 3000 rpm, producing up to 24.3 kW. It powers generator sets from Craftsman Marine.
Maintenance schedule
| Item | Spec | Capacity | Part # | Interval | |
|---|
| Air filter | cooling water strainer | | — | | |
| Fuel filter | | | — | 100 hr | |
| Oil filter | | | — | 1000 hr | |
| Battery | | | — | | |
| Belt | V-belt | | — | | |
| Coolant | 40% ethylene-glycol, 60% clean tap water | 6.5 liters | — | | |
| Oil | 15W40 | 6.5 litres | — | 10 hr | |
| Spark plug | | | — | | |
Pooled from every document that names this exact engine — confirm the interval and part number against your unit's serial number.
Common questions
What is the displacement of the Mitsubishi CM4.33?
The Mitsubishi CM4.33 has a displacement of 1.5 liters.
Which generators use the Mitsubishi CM4.33 engine?
The Mitsubishi CM4.33 powers 1 generator set(s), including Craftsman Marine CM4.33.
How often should you change the oil in the Mitsubishi CM4.33?
The Mitsubishi CM4.33 oil change interval is every 10 hours.
What is a common problem with the Mitsubishi CM4.33 engine?
A commonly reported issue on generators using the Mitsubishi CM4.33 is: Starter motor does neither rotate nor engage. Cause: Defective or discharged battery, Burnt fuse, Loose or corroded connections in the starter circuit, Defective starter switch or relay, Defective starter motor or pinion does not engage, Starter relay not activated owing to insufficient voltage, on account of a too long cable from engine to instrument panel, Jammed components. Fix: Check battery/charge or replace and check alternator for proper functioning, Replace, Clean and tighten the connections, Replace defective component, Replace starter motor Fit an auxiliary starter relay.