Home›Repair guides›Caterpillar›Water Pump - Inspect

Caterpillar — Water Pump - Inspect

Maintenance

From a Caterpillar owner's manual covering: 3406E, C15, SEBU7005-08. Check it applies to your exact model before use.

Applies to: Caterpillar 3406E, Caterpillar C15

Before you start

  • A failed water pump might cause severe engine overheating problems that could result in cracks in the cylinder head, a piston seizure or other potential damage to the engine.

Procedure

  1. Visually inspect the water pump for leaks.
  2. If leaking of the water pump seals is observed, replace all of the water pump seals.
  3. Inspect the water pump for wear, cracks, pin holes and proper operation.
  4. Refer to the Parts Manual for correct part numbers or consult your Caterpillar dealer if repair or replacement is needed.

Full service-parts list: Caterpillar 3406E →, Caterpillar C15 →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →