Caterpillar — Starting with Jump Start Cables
Operation · Starting system
From a Caterpillar owner's manual covering: C15 Generator Set, EMCP 3, SEBU7909-01, SEBU7969-01. Check it applies to your exact model before use.
Applies to: Caterpillar EMCP 3, Caterpillar C1.5 engine
Before you start
- Improper jump start cable connections can cause an explosion resulting in personal injury.
Procedure
- Turn the start switch on the stalled engine to OFF and turn off accessories.
- Connect one positive jump cable end to the discharged battery positive terminal.
- Connect the other positive end to the electrical source positive terminal.
- Connect one negative end to the electrical source negative terminal.
- Connect the other negative end to the engine block or chassis ground.
- Charge the batteries, then start the engine.
- Disconnect the jump start cables in reverse order.
Tools required
- Jump start cables Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Use ONLY equal voltage for jump starting
Full service-parts list: Caterpillar EMCP 3 →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.