Home›Repair guides›Caterpillar›Engine Valve Rotators - Inspect

Caterpillar — Engine Valve Rotators - Inspect

Maintenance

From a Caterpillar owner's manual covering: 3408C, 3412, 3412C. Check it applies to your exact model before use.

Applies to: Caterpillar 3408C, Caterpillar 3412, Caterpillar 3412C

Before you start

  • Wear protective glasses or face shield and protective clothing to prevent burns.
  • An improperly operating valve rotator will accelerate valve face and valve seat wear.

Procedure

  1. Perform after the engine valve lash is set, before valve covers are installed.
  2. Start the engine according to Engine Starting procedure.
  3. Operate the engine at low idle.
  4. Observe the top surface of each valve rotator.
  5. The valve rotators should turn slightly when the valves close.
  6. If a valve fails to rotate, consult your Caterpillar dealer.

Full service-parts list: Caterpillar 3408C →, Caterpillar 3412 →, Caterpillar 3412C →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →