Caterpillar C15 Industrial Engine — Battery Electrolyte Level - Check
Maintenance
For the Caterpillar C15 Industrial Engine, from the Caterpillar owner's manual.
Applies to: Caterpillar C1.5 engine
Before you start
- All lead-acid batteries contain sulfuric acid which can burn skin and clothing. Wear a face shield and protective clothing.
Procedure
- Remove the filler caps. Maintain the electrolyte level to the 'FULL' mark; add distilled or low-mineral water if needed.
- Check the condition of the electrolyte with the 245-5829 Coolant Battery Tester Refractometer.
- Keep batteries clean. Clean the battery case with baking soda/water or ammonia/water; rinse thoroughly.
- Clean terminals and cable clamps with fine sandpaper until bright or shiny; do not remove excess material.
- Coat clamps and terminals with 5N-5561 Silicone Lubricant, petroleum jelly, or MPGM.
Tools required
- 245-5829 Coolant Battery Tester Refractometer Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.