Caterpillar 3516C / 3516C Generator Set — Generator Bearing - Lubricate
Maintenance · Generator bearings
For the Caterpillar 3516C / 3516C Generator Set, from the Caterpillar operator's manual.
Applies to: Caterpillar 3516C, Caterpillar 3516C engine
Before you start
- Do not mix greases
Parts for this job
- 3890434 Oil filter — Caterpillar 3516C Amazon eBay $82.42 PartsGeek $30.97 NAPA $45.70
- 3890434 Oil filter — Caterpillar 3516C engine Amazon eBay $82.42 PartsGeek $30.97 NAPA $45.70
Part numbers from the service-parts lists for Caterpillar 3516C, Caterpillar 3516C engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove louver assembly or rear plate from rear of generator housing.
- Remove the top grease pipe plug and the lower grease pipe plug.
- Install a grease fitting in the grease pipe.
- Grease the bearings with the appropriate grease from Table 24; do not mix greases.
- Wipe off excess grease; remove top grease fitting; install plug.
- Operate generator for one hour to allow grease to expand and purge.
- Stop engine; install plug in bottom grease pipe; wipe off excess grease.
- Install the louver assembly or rear plate.
Tools required
- Grease fitting Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
Full service-parts list: Caterpillar 3516C →, Caterpillar 3516C engine →
Source: Caterpillar operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.