Caterpillar 3516C / 3516C Generator Set — Air Starting Motor Lubricator Bowl - Clean
Maintenance
For the Caterpillar 3516C / 3516C Generator Set, from the Caterpillar operator's manual.
Applies to: Caterpillar 3516C, Caterpillar 3516C engine
Before you start
- Do not disconnect or remove hoses or fittings until all pressure in the system has been relieved
- Contain fluids and dispose of according to local regulations
Parts for this job
- 3890434 Oil filter — Caterpillar 3516C Amazon eBay $82.42 PartsGeek $30.97 NAPA $45.70
- 3890434 Oil filter — Caterpillar 3516C engine Amazon eBay $82.42 PartsGeek $30.97 NAPA $45.70
Part numbers from the service-parts lists for Caterpillar 3516C, Caterpillar 3516C engine. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Ensure air supply to lubricator is OFF.
- Slowly loosen filler plug to release pressure from lubricator.
- Place container under bowl and open drain valve to drain oil.
- Remove bowl; clean with warm water.
- Dry bowl; inspect for cracks; replace if cracked; inspect gasket.
- Install bowl.
- Make sure drain valve is closed.
Full service-parts list: Caterpillar 3516C →, Caterpillar 3516C engine →
Source: Caterpillar operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.