Caterpillar 3516 / EMCP 3 — Event Clearing (Procedure For Clearing Events)
Operation · EMCP3 event log
For the Caterpillar 3516 / EMCP 3, from the Caterpillar service manual.
Applies to: Caterpillar 3516, Caterpillar EMCP 3, Caterpillar 3516B engine
Procedure
- Press the STOP key to shut down the engine. Enter the EVENT LOG option from the main menu.
- Select an ECM from the list.
- Scroll through the event conditions to highlight the active events.
- Repair the condition that caused the shutdown event.
- Press the ENTER key. RESET will be highlighted if the condition is gone and control is in STOP.
- Press ENTER again. The fault clears and the red shutdown light turns off.
- Press the ESCAPE key 2 times to return to the main menu.
Full service-parts list: Caterpillar 3516 →, Caterpillar EMCP 3 →
Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.