Caterpillar 3512 — Engine Air Cleaner Element (Single Element) - Inspect/Replace
Maintenance
For the Caterpillar 3512, from the Caterpillar owner's manual.
Applies to: Caterpillar 3512
Before you start
- Never run the engine without an air cleaner element installed. Never run the engine with a damaged air cleaner element.
- Never service the air cleaner element with the engine running.
Parts for this job
Part numbers from the service-parts list for Caterpillar 3512. Verify against your serial number before ordering; some links are affiliate links.
Procedure
- Remove the air cleaner cover. Remove the air cleaner element.
- Cover the air inlet with tape to keep dirt out.
- Clean the inside of the air cleaner cover and body with a clean, dry cloth.
- Remove the tape. Install an air cleaner element that is new or cleaned.
- Install the air cleaner cover.
- If necessary, reset the air cleaner service indicator.
Tools required
- Clean, dry cloth Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Element may be cleaned up to six times if properly cleaned and inspected
- Replace at least one time per year regardless of the number of cleanings
Full service-parts list: Caterpillar 3512 →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.