Home›Repair guides›Caterpillar›Engine Air Cleaner Element (Single Element) - Clean/Replace

Caterpillar 3512 — Engine Air Cleaner Element (Single Element) - Clean/Replace

Maintenance

For the Caterpillar 3512, from the Caterpillar owner's manual.

Applies to: Caterpillar 3512, Caterpillar 3512B engine

Before you start

  • Never run the engine without an air cleaner element installed
  • Do not wash the filter element
  • Do not clean the elements by bumping or tapping

Parts for this job

Part numbers from the service-parts lists for Caterpillar 3512, Caterpillar 3512B engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Remove the air cleaner cover and element.
  2. Cover the air inlet with tape to keep dirt out.
  3. Clean the inside of the air cleaner cover and body with a clean, dry cloth.
  4. Remove the tape; install a new or cleaned air cleaner element.
  5. Install the air cleaner cover.
  6. Reset the air cleaner service indicator.

Specs & values

  • Air pressure must not exceed 207 kPa (30 psi)
  • Element may be cleaned up to six times; replace at least once per year

Full service-parts list: Caterpillar 3512 →, Caterpillar 3512B engine →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →