Home›Repair guides›Caterpillar›Battery - Replace

Caterpillar 3512 — Battery - Replace

Maintenance

For the Caterpillar 3512, from the Caterpillar service manual.

Applies to: Caterpillar 3512, Caterpillar 3512B engine

Before you start

  • Batteries give off combustible gases which can explode; do not smoke when servicing.

Parts for this job

Part numbers from the service-parts lists for Caterpillar 3512, Caterpillar 3512B engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Turn key start switch OFF, remove key and all electrical loads.
  2. Turn OFF and disconnect battery charger.
  3. Disconnect NEGATIVE cable from battery terminal first.
  4. Disconnect POSITIVE cable from battery terminal.
  5. Remove used battery and recycle it.
  6. Install new battery.
  7. Connect POSITIVE cable to battery terminal first.
  8. Connect NEGATIVE cable to ground plane last.

Full service-parts list: Caterpillar 3512 →, Caterpillar 3512B engine →

Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →