Home›Repair guides›Caterpillar›Actuator Control Linkage - Lubricate

Caterpillar 3512 — Actuator Control Linkage - Lubricate

Maintenance

For the Caterpillar 3512, from the Caterpillar owner's manual.

Applies to: Caterpillar 3512

Parts for this job

Part numbers from the service-parts list for Caterpillar 3512. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Apply grease to the grease fittings with a hand grease gun using MPGM.
  2. Stop the engine.
  3. Move the linkage by hand.
  4. If the linkage binds, repair the linkage.

Tools required

Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.

Specs & values

  • Lubricant: MPGM

Full service-parts list: Caterpillar 3512 →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →