Caterpillar 3406E — Flash Programming
Installation · ECM personality module
For the Caterpillar 3406E, from the Caterpillar service manual.
Applies to: Caterpillar 3406E
Before you start
- Operating the engine with a Personality Module not designed for that engine will damage the engine.
Procedure
- Obtain the part number for the new flash file.
- Connect the electronic service tool to the data link connector.
- Turn the key switch to the ON position. Do not start the engine.
- Select WinFlash from the Utilities menu on the electronic service tool.
- Program the flash file into the ECM. Select the engine ECM under Detected ECMs.
- Press the Browse button in order to select the part number of the flash file.
- Verify that the File Values match the application.
- Press the Begin Flash button.
- Start the engine and check for proper operation.
- Program any parameters that were not programmed if a 253-02 Check Customer Or System Parameters is active.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Full service-parts list: Caterpillar 3406E →
Source: Caterpillar service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.