Caterpillar 3054C — Radiator - Clean
Maintenance
For the Caterpillar 3054C, from the Caterpillar owner's manual.
Applies to: Caterpillar 3054C engine
Before you start
- Personal injury can result from air pressure.
Procedure
- Inspect the radiator for damaged fins, corrosion, dirt, grease, insects, leaves, oil, and debris.
- Direct pressurized air opposite the fan airflow, holding the nozzle about 6 mm from the fins.
- Use pressurized water (less than 275 kPa) to soften mud; clean the core from both sides.
- Use degreaser and steam to remove oil and grease.
- Wash the core with detergent and hot water, then rinse thoroughly.
- Start the engine, accelerate to high idle, then inspect with a light bulb.
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Maximum air pressure 205 kPa (30 psi)
- Maximum water pressure 275 kPa (40 psi)
Full service-parts list: Caterpillar 3054C engine →
Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.