Home›Repair guides›Caterpillar›Fuel Tank Water and Sediment - Drain

Caterpillar 3054C — Fuel Tank Water and Sediment - Drain

Maintenance

For the Caterpillar 3054C, from the Caterpillar owner's manual.

Applies to: Caterpillar 3054C engine

Before you start

  • Failure to properly close the drain can allow air into the system.

Procedure

  1. Open the drain valve on the bottom of the fuel tank to drain water and sediment.
  2. Close the drain valve.
  3. Check the fuel daily; drain after operating the engine or after the tank has been filled.
  4. Allow five to ten minutes before performing this procedure.
  5. Fill the fuel tank after operating the engine to drive out moist air; do not fill to the top.
  6. Drain water and sediment from fuel storage tanks weekly, at oil change, and at refill.

Full service-parts list: Caterpillar 3054C engine →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →