Home›Repair guides›Caterpillar›Fuel System Primary Filter/Water Separator - Drain

Caterpillar 3054C — Fuel System Primary Filter/Water Separator - Drain

Maintenance

For the Caterpillar 3054C, from the Caterpillar owner's manual.

Applies to: Caterpillar 3054C engine

Before you start

  • The water separator is not a filter; the engine should never run with the water separator more than half full.

Parts for this job

Part numbers from the service-parts list for Caterpillar 3054C engine. Verify against your serial number before ordering; some links are affiliate links.

Procedure

  1. Place a suitable container below the water separator.
  2. Open the drain (5) and allow the fluid to drain.
  3. When clean fuel drains, close the drain (5) and tighten by hand only; dispose of the drained fluid correctly.

Full service-parts list: Caterpillar 3054C engine →

Source: Caterpillar owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Caterpillar repair guides →