Briggs & Stratton — Starting Engine — Electric (Key) Starter (if equipped)

Operation

From a Briggs & Stratton owner's manual — check it applies to your exact model before use.

Browse Briggs & Stratton generators & specs →

Procedure

1. Check oil level.
2. Open fuel shut-off valve (if equipped).
3. Move choke control to CHOKE or START.
4. Move throttle to FAST (if equipped). Operate engine with throttle in FAST.
5. Push rocker switch (if equipped) to ON or RUN.
6. Insert key and turn to START.
7. Let engine warm up; move choke control lever toward RUN a short distance at a time.
8. To stop: move throttle (if equipped) to SLOW; turn key to OFF and remove key; push rocker switch to OFF or STOP; close fuel shut-off valve.

Source: Briggs & Stratton owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.

More Briggs & Stratton repair guides →