Briggs & Stratton — Start Generator
Operation · Engine
From a Briggs & Stratton operator's manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Before you start
- Unit must be on a level surface to start or operation will fail.
- Check oil level in crankcase before starting.
Procedure
- Make sure unit is on a level surface.
- Turn the engine switch to ON position.
- Push choke lever to CHOKE position.
- Grasp recoil handle and pull slowly until slight resistance is felt.
- Then pull rapidly to start engine.
- If engine starts, move choke lever to RUN position.
- If engine fails to start, move choke lever to half choke position and pull recoil handle twice.
Source: Briggs & Stratton operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.