Briggs & Stratton — Spark Plugs Service
Maintenance · ignition
From a Briggs & Stratton owner's manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Procedure
- Clean area around spark plugs.
- Remove and inspect spark plugs; replace if electrodes pitted/burned or porcelain cracked.
- Check electrode gap with wire feeler gauge and reset spark plug gap to recommended gap if necessary.
- Install spark plugs and tighten firmly.
Tools required
- wire feeler gauge Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- {'item': 'spark plug gap', 'value': '0.030 in. (0.76 mm)'}
Source: Briggs & Stratton owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.