Briggs & Stratton — Remove Flywheel
Repair & overhaul
From a Briggs & Stratton service manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Before you start
- Do not strike flywheel with a hard object or metal tool as this may cause flywheel to shatter in operation. Always use approved flywheel removal tools.
Procedure
- Remove rotating screen if equipped and blower housing.
- Install flywheel nut Part #805021 flush with top of crankshaft threads to protect threads.
- Install flywheel puller Tool #19203 into flywheel puller holes evenly.
- Tighten puller screws equally until flywheel loosens.
- Inspect flywheel key, keyways, flywheel and crankshaft for cracks, burrs and distortion.
Tools required
- Flywheel puller Tool #19203 Amazon
- Flywheel strap wrench Tool #19372 Amazon
- Flywheel holder Tool #19321 Amazon
- 30 mm socket Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Briggs & Stratton service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.