Briggs & Stratton — Recoil Start / Electric Start
Operation · engine
From a Briggs & Stratton owner's manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Before you start
- Starter cord kickback can cause broken bones, fractures, bruises, or sprains
Procedure
- Make sure unit is on a level surface.
- Turn the fuel valve to the On position.
- Make sure idle control switch is in Off position.
- For electric starting, push and hold the start switch in Start position (max 15 seconds, pause 1 minute between attempts) until generator starts.
- For manual starting, grasp recoil handle and pull slowly until slight resistance is felt, then pull rapidly one time to start engine.
Source: Briggs & Stratton owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.