Briggs & Stratton — Install Flywheel
Repair & overhaul
From a Briggs & Stratton service manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Procedure
- Clean flywheel taper and crankshaft taper removing all oil, dirt or grease.
- Insert flywheel key into crankshaft; align keyway and slide flywheel onto crankshaft.
- Install starter hub when used, washer and flywheel nut.
- Torque flywheel nut to 175 Nm (125 ft. lbs.).
Tools required
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Specs & values
- Flywheel nut 175 Nm (125 ft. lbs.)
Source: Briggs & Stratton service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.