Briggs & Stratton — Fuel Selection Device (16-20 kW)
Adjustments · Fuel selector valve
From a Briggs & Stratton service manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Before you start
- Do not move the line on the dial past the line on the housing that corresponds to the selected fuel type or parts damage will occur.
- Damage to the fuel selector valve requires replacement of the fuel pressure regulator.
Procedure
- Locate the fuel selector valve mounted at the top of the fuel pressure regulator.
- Remove tamper proof plug and verify selector is set to either LP or NG.
- Use a 5 mm Allen wrench to gently turn selector dial if necessary; do not move line past the correct line.
- Install tamper proof plug using a drop of suitable adhesive.
Tools required
- 5 mm Allen wrench Amazon
Tool links are Amazon searches (affiliate links); manufacturer special tools may only be available from a dealer.
Source: Briggs & Stratton service manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.