Briggs & Stratton — Adding Fuel
Operation · Fuel tank
From a Briggs & Stratton owner's manual — check it applies to your exact model before use.
Browse Briggs & Stratton generators & specs →
Before you start
- Gasoline and its vapors are extremely flammable and explosive.
Procedure
- Fill fuel tank outdoors or in well-ventilated area, away from sparks, open flames, pilot lights, heat, and other ignition sources.
- Turn engine OFF and let engine cool at least 2 minutes before removing gas cap.
- Remove cap. Fill tank to approximately 1-1/2 inches below top of neck to allow for fuel expansion. Be careful not to overfill.
- If fuel spills, wait until it evaporates before starting engine.
- Replace cap before starting.
Specs & values
- Fill to approximately 1-1/2 inches below top of neck
Source: Briggs & Stratton owner's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.