Atlas Copco — Air filter
Maintenance · air filter (AF)
From a Atlas Copco operator's manual covering: GA 10 bar, GA 100 psi, GA 125 psi, GA 13 bar, GA 150 psi, GA 175 psi, GA 7.5-8 bar, GA 75, GA5, GA90. Check it applies to your exact model before use.
Applies to: Atlas Copco GA 75
Before you start
- Before carrying out any maintenance, repair or adjustment, stop the compressor, press emergency stop button (S3), switch off the voltage and depressurize the compressor.
Procedure
- Stop the compressor. Switch off the voltage. Release the snap clips and remove the dust trap and air filter element. Clean the trap. Discard the filter element.
- Refit the new element and the trap.
- Reset the service indicator (VI) by pushing the knob in the extremity of the body.
- Reset the air filter service warning.
Source: Atlas Copco operator's manual. Steps and values are as documented; always cross-check against the official manual and any later revisions for your exact serial number before servicing.