Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby kVA | 62000 |
| Emissions | Not specified |
| Controller | DSE4510 |
| Oil capacity | 13.5 L |
| Alternator | Stamford/AvK UC1224F |
| Voltage options | 120/240 V, 120/208 V, 277/480 V |
| Phase | Single |
| Rated current | 229 A |
| Power factor | 1.0 |
| Circuit breaker | 215 A |
| Battery group | Not specified |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 50 L |
| Max ambient | Not specified °C |
| Tank runtime | Not specified hr |
Engine
| Oil capacity | 13.5 L |
|---|---|
| Coolant capacity | 50.0 L |
| Aspiration | Turbocharged |
| Rated speed | 1800 rpm |
Filters & service parts
model family| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Air Filter Element | 8025818 | PartsGeek | ||
| Fuel filter | Fuel Filter Elements | 2994048 | PartsGeek | ||
| Oil filter | Oil Filter (2 req’d) | 2992544 | PartsGeek | ||
| Belt | Alternator Belt | 500341810 | PartsGeek |
Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.
Common questions
What engine does the Winco DE65F4 use?
The Winco DE65F4 is powered by the Iveco/FPT N45SM2 engine.
What fuel does the Winco DE65F4 use?
The Winco DE65F4 runs on Diesel.
What is the oil capacity of the Winco DE65F4?
The Iveco/FPT N45SM2 engine in the Winco DE65F4 has an oil capacity of 13.5 liters.
What alternator does the Winco DE65F4 use?
The Winco DE65F4 uses a Stamford/AvK UC1224F alternator.
What oil filter does the Winco DE65F4 use?
The Winco DE65F4 uses oil filter part number 2992544.
What fuel filter does the Winco DE65F4 use?
The Winco DE65F4 uses fuel filter part number 2994048.
What air filter does the Winco DE65F4 use?
The Winco DE65F4 uses air filter part number 8025818.
Troubleshooting
5Symptoms & remedies
| Symptom | Cause |
|---|---|
| Engine will not crank | Low/dead battery |
| Engine cranks but will not start | Improper fuel delivery to the unit |
| Engine starts, then stops and alarm light comes on | Engine oil pressure is low |
| Engine will not come up to speed after it starts | Insufficient fuel volume getting to the unit |
| No AC output from generator | Defective Diode |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 100% | 2.6 | 0.68 |