Home›Winco›Winco DE45F4

Winco DE45F4 Generator Set

The Winco DE45F4 is a Diesel generator set powered by a Iveco/FPT N45SM1 engine. It is available at 120/240 V, 120/208 V and 277/480 V, single-phase, 60 Hz and rated 166 A. It holds about 13.5 L (3.6 gal) of oil and 50 L (13.2 gal) of coolant, with a maximum ambient rating of Not specified °C. Starting uses 1 group-Not specified battery at 12 V. The set measures Not specified×Not specified×Not specified mm (None×None×None in), weighs about Not specified kg (None lb) and produces Not specified dBA at Not specified m. An integrated tank holds Not specified L (None gal), roughly Not specified hours of runtime.

13.5 L
Oil capacity
1
Document types

Service parts for the DE45F4

Grouped by system, with how many of each the parts manual calls for.

Air intake

1 required

Fuel system

1 required

Oil system

1 required

Belts

1 required
500341810Beltsee priceAmazon

Prices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.

Specifications

FuelDiesel
Frequency60.0 Hz
Standby kVA45000
EmissionsNot specified
ControllerDSE4510
Oil capacity13.5 L
AlternatorStamford/AvK UC1224D
Voltage options120/240 V, 120/208 V, 277/480 V
PhaseSingle
Rated current166 A
Power factor1.0
Circuit breaker156 A
Battery groupNot specified
Battery voltage12 V
Battery quantity1
Coolant capacity50 L
Max ambientNot specified °C
Tank runtimeNot specified hr

Engine

Iveco/FPT N45SM1
Oil capacity13.5 L
Coolant capacity50.0 L
AspirationTurbocharged
Rated speed1800 rpm

Filters & service parts

model family
ItemSpecCapacityPart #Interval
Air filterAir Filter Element8025818 Amazon eBay
Fuel filterFuel Filter Elements2994048 Amazon eBay
Oil filterOil Filter (2 req’d)2992544 Amazon eBay FridayParts $55.99
BeltAlternator Belt500341810 Amazon eBay

Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.

Common questions

What engine is in the Winco DE45F4?

The Winco DE45F4 is powered by the Iveco/FPT N45SM1 engine.

Is the Winco DE45F4 diesel or gas?

The Winco DE45F4 runs on Diesel.

How much oil does the Winco DE45F4 take?

The Iveco/FPT N45SM1 engine in the Winco DE45F4 has an oil capacity of 13.5 liters.

How much coolant does the Winco DE45F4 hold?

The Winco DE45F4 cooling system holds 50 liters (13.2 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What voltage does the Winco DE45F4 produce?

The Winco DE45F4 is offered in 120/240 V, 120/208 V, 277/480 V, Single-phase.

What size battery does the Winco DE45F4 need?

The Winco DE45F4 uses 1 battery, 12 V each, group Not specified, per the manufacturer specification sheet.

What alternator comes on the Winco DE45F4?

The Winco DE45F4 uses a Stamford/AvK UC1224D alternator.

What oil filter fits the Winco DE45F4?

The Winco DE45F4 uses oil filter part number 2992544.

What fuel filter fits the Winco DE45F4?

The Winco DE45F4 uses fuel filter part number 2994048.

Which air filter part number does the Winco DE45F4 take?

The Winco DE45F4 uses air filter part number 8025818.

Troubleshooting

5

Symptoms & remedies

SymptomCause
Engine will not crankLow/dead battery
Engine cranks but will not startImproper fuel delivery to the unit
Engine starts, then stops and alarm light comes onEngine oil pressure is low
Engine will not come up to speed after it startsInsufficient fuel volume getting to the unit
No AC output from generatorDefective Diode

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.

Fuel consumption

RatingLoadL/hgal/h
Standby100%2.60.68

Available documents

Owner's manual — Winco DE20-DE90 (Winco)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.