Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby kVA | 20000 |
| Emissions | Not specified |
| Controller | DSE4510 |
| Oil capacity | 8.6 L |
| Alternator | Stamford/AvK PI144E |
| Voltage options | 120/240 V, 120/208 V, 277/480 V |
| Phase | Single |
| Rated current | 83.0 A |
| Power factor | 1.0 |
| Circuit breaker | 104 A |
| Battery group | Not specified |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 50 L |
| Max ambient | Not specified °C |
| Tank runtime | Not specified hr |
Engine
| Oil capacity | 6.7 L |
|---|---|
| Coolant capacity | 3.8 L |
| Displacement | 2.2 L |
| Aspiration | naturally aspirated |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Isuzu 4LE1| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Air Filter Element | 8025818 | PartsGeek | ||
| Fuel filter | 8944015310 | PartsGeek | |||
| Oil filter | Spin-on | 51334 | PartsGeek $7.98 | ||
| Belt | Alternator Belt | 500341810 | PartsGeek | ||
| Coolant | — | ||||
| Oil | Spin-on | — |
Common questions
What engine does the Winco DE20I4 use?
The Winco DE20I4 is powered by the Isuzu 4LE1 engine.
What fuel does the Winco DE20I4 use?
The Winco DE20I4 runs on Diesel.
What is the oil capacity of the Winco DE20I4?
The Isuzu 4LE1 engine in the Winco DE20I4 has an oil capacity of 6.7 liters.
What alternator does the Winco DE20I4 use?
The Winco DE20I4 uses a Stamford/AvK PI144E alternator.
What oil filter does the Winco DE20I4 use?
The Winco DE20I4 uses oil filter part number 51334.
What fuel filter does the Winco DE20I4 use?
The Winco DE20I4 uses fuel filter part number 8944015310.
What air filter does the Winco DE20I4 use?
The Winco DE20I4 uses air filter part number 8025818.
Troubleshooting
5Symptoms & remedies
| Symptom | Cause |
|---|---|
| Engine will not crank | Low/dead battery |
| Engine cranks but will not start | Improper fuel delivery to the unit |
| Engine starts, then stops and alarm light comes on | Engine oil pressure is low |
| Engine will not come up to speed after it starts | Insufficient fuel volume getting to the unit |
| No AC output from generator | Defective Diode |
Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.
Parts
3| Part # | Description | Qty | System | |
|---|---|---|---|---|
| WSLE0406 | oil filter with full-flow bypass, water-cooled oil cooler and oil jet to cool the piston | Oil filter | PartsGeek | |
| WSLE0021 | valve clearance standard value for inlet valve (mm/in) | Service part / kit | PartsGeek | |
| WSLE0022 | valve clearance standard value for exhaust valve (mm/in) | Service part / kit | PartsGeek |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 100% | 2.6 | 0.68 |
Available documents
Owner's manual — Winco DE20-DE90 (Winco)