Specifications
| Frequency | 60.0 Hz |
|---|---|
| Standby power | 3125 kW |
| Standby kVA | 3438 |
| Prime power | 3014 kW |
| Oil capacity | 4.9 L |
| Alternator | Leroy-Somer LSA 53.1M80 |
| Voltage options | 480/277 V |
| Phase | 3 |
| Power factor | 0.8 |
| Dimensions (L×W×H) | 5730×2250×2454 mm |
| Dry weight | 18365 kg |
Engine
| Oil capacity | 4.9 L |
|---|---|
| Coolant capacity | 7.7 L |
| Displacement | 1.562 L |
| Aspiration | Turbo |
| Rated speed | 1800 rpm |
Common questions
What size generator is the SDMO X2750UC2?
The SDMO X2750UC2 is rated 3125 kW standby (3438.0 kVA).
What engine does the SDMO X2750UC2 use?
The SDMO X2750UC2 is powered by the MTU 20V4000G83E engine.
What's the oil capacity on a SDMO X2750UC2?
The MTU 20V4000G83E engine in the SDMO X2750UC2 has an oil capacity of 4.9 liters.
What is the cooling system capacity of the SDMO X2750UC2?
The SDMO X2750UC2 cooling system holds 7.7 liters (2.0 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the SDMO X2750UC2?
The SDMO X2750UC2 is rated 3014 kW prime (3600 kVA), against 3125 kW standby.
How much does the SDMO X2750UC2 weigh?
The SDMO X2750UC2 has a dry weight of 18365 kg (40487 lb).
What voltages is the SDMO X2750UC2 available in?
The SDMO X2750UC2 is offered in 480/277 V, 3-phase.
What alternator comes on the SDMO X2750UC2?
The SDMO X2750UC2 uses a Leroy-Somer LSA 53.1M80 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 363.0 | 95.89 |
| Prime | 75% | 504.0 | 133.14 |
| Prime | 100% | 640.0 | 169.07 |
| Prime | 110% | 701.0 | 185.18 |
Available documents
Spec sheet — X2750UC2 (Sdmo)
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.