Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 2200 kW |
| Standby kVA | 2750 |
| Prime power | 2000 kW |
| Controller | Microprocessor |
| Oil capacity | 340.0 L |
| Alternator | Leroy-Somer LSA53S75 |
| Voltage options | 415 V, 240 V, 400 V, 230 V, 380 V, 220 V |
| Phase | 3 |
| Rated current | 3826 A |
| Power factor | 0.8 |
| Dimensions (L×W×H) | 5302×2250×2454 mm |
| Dry weight | 17290 kg |
Engine
| Oil capacity | 390.0 L |
|---|---|
| Displacement | 89.81 L |
| Aspiration | Air/Water DC |
| Rated speed | 1500 rpm |
Common questions
What is the power rating of the SDMO X2750F?
The SDMO X2750F is rated 2200 kW standby (2750.0 kVA).
What engine does the SDMO X2750F use?
The SDMO X2750F is powered by the MTU 20V4000G22F engine.
What fuel does the SDMO X2750F use?
The SDMO X2750F runs on Diesel.
What's the oil capacity on a SDMO X2750F?
The MTU 20V4000G22F engine in the SDMO X2750F has an oil capacity of 390.0 liters.
What is the prime power rating of the SDMO X2750F?
The SDMO X2750F is rated 2000 kW prime (2500 kVA), against 2200 kW standby.
What is the dry weight of the SDMO X2750F?
The SDMO X2750F has a dry weight of 17290 kg (38117 lb).
What voltage does the SDMO X2750F produce?
The SDMO X2750F is offered in 415 V, 240 V, 400 V, 230 V, 380 V, 220 V, 3-phase.
What alternator comes on the SDMO X2750F?
The SDMO X2750F uses a Leroy-Somer LSA53S75 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 263.0 | 69.5 |
| Prime | 75% | 380.0 | 100.4 |
| Prime | 100% | 497.0 | 131.3 |
| Standby | 110% | 549.0 | 145.0 |
Available documents
Spec sheet — X2750F (SDMO)
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.