Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 364 kW |
| Standby kVA | 430 |
| Emissions | Tier II |
| Controller | TAD 1242 GE |
| Oil capacity | 738.0 L |
| Alternator | 472 VS3 |
| Voltage options | 480/277 V |
| Phase | 3-phase |
| Rated current | 15,5 A |
| Circuit breaker | 15,5 A |
| Battery group | J 30 J 40 UC |
| Battery voltage | 12 V V |
| Battery quantity | ● |
| Coolant capacity | 738.0 L |
| Dimensions (L×W×H) | 124×52×71 mm |
| Dry weight | 6702 kg |
Engine
| Oil capacity | 738.0 L |
|---|---|
| Coolant capacity | 738.0 L |
| Displacement | 6.0 L |
| Aspiration | 4-stroke liquid-cooled |
| Rated speed | 5 rpm |
Common questions
How many kW is the SDMO V400UC?
The SDMO V400UC is rated 364 kW standby (430.0 kVA).
What engine is in the SDMO V400UC?
The SDMO V400UC is powered by the TAD 1242 GE engine.
What fuel does the SDMO V400UC use?
The SDMO V400UC runs on Diesel.
What is the oil capacity of the SDMO V400UC?
The TAD 1242 GE engine in the SDMO V400UC has an oil capacity of 738.0 liters.
How much coolant does the SDMO V400UC hold?
The SDMO V400UC cooling system holds 738 liters (195.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How much does the SDMO V400UC weigh?
The SDMO V400UC has a dry weight of 6702 kg (14775 lb).
What voltage does the SDMO V400UC produce?
The SDMO V400UC is offered in 480/277 V, 3-phase-phase.
How many cold cranking amps does the SDMO V400UC require?
The SDMO V400UC uses ● batteryies, 12 V V each, group J 30 J 40 UC, per the manufacturer specification sheet.
What alternator does the SDMO V400UC use?
The SDMO V400UC uses a 472 VS3 alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 75% | 15.0 | 15.0 |
| Standby | 75% | 15.0 | 15.0 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.