Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 30 kW |
| Standby kVA | 38 |
| Prime power | 27 kW |
| Emissions | N/A |
| Controller | Nexys, Telys |
| Oil capacity | 10.0 L |
| Alternator | Mecc Alte ECO28VL (4-pole, Class H insulation) |
| Voltage options | 480/277 V, 440/254 V, 240/120 V, 230/115 V, 220/127 V, 208/120 V |
| Phase | 3 |
| Rated current | 105 A |
| Power factor | 0.8 |
| Circuit breaker | 105 A |
| Battery group | 12 V |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 8.9 L |
| Max ambient | 50 °C |
| Dimensions (L×W×H) | 1515×780×1120 mm |
| Dry weight | 600 kg |
| Sound level | 80.1 dBA @ 1 m |
| Fuel tank | 36.0 L |
| Tank runtime | N/A hr |
Engine
| Oil capacity | 9.0 L |
|---|---|
| Coolant capacity | 8.9 L |
| Displacement | 3.33 L |
| Aspiration | N/A |
| Rated speed | 1800 rpm |
Common questions
What is the power rating of the SDMO TM30UC?
The SDMO TM30UC is rated 30 kW standby (38.0 kVA).
Which engine powers the SDMO TM30UC?
The SDMO TM30UC is powered by the Mitsubishi S4S.Y262SD engine.
What fuel does the SDMO TM30UC use?
The SDMO TM30UC runs on Diesel.
What is the oil capacity of the SDMO TM30UC?
The Mitsubishi S4S.Y262SD engine in the SDMO TM30UC has an oil capacity of 9.0 liters.
What is the cooling system capacity of the SDMO TM30UC?
The SDMO TM30UC cooling system holds 8.9 liters (2.4 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the SDMO TM30UC?
The SDMO TM30UC is rated 27 kW prime (34 kVA), against 30 kW standby.
How loud is the SDMO TM30UC?
The SDMO TM30UC is rated at 80.1 dBA at 1 m, per the manufacturer specification sheet.
How much does the SDMO TM30UC weigh?
The SDMO TM30UC has a dry weight of 600 kg (1322 lb).
What size fuel tank does the SDMO TM30UC have?
The SDMO TM30UC has a 36 liter (10 US gallon) fuel tank, giving about N/A hours of runtime.
What voltage does the SDMO TM30UC produce?
The SDMO TM30UC is offered in 480/277 V, 440/254 V, 240/120 V, 230/115 V, 220/127 V, 208/120 V, 3-phase.
How many cold cranking amps does the SDMO TM30UC require?
The SDMO TM30UC uses 1 battery, 12 V each, group 12 V, per the manufacturer specification sheet.
What alternator does the SDMO TM30UC use?
The SDMO TM30UC uses a Mecc Alte ECO28VL alternator. It has 4 poles. Insulation class H.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 6.0 | 1.6 | |
| Prime | 50% | 6.0 | 1.6 |
| Prime | 75% | 8.2 | 2.2 |
| Prime | 100% | 9.8 | 2.6 |
| Standby | 75% | 8.2 | 2.2 |
| Standby | 100% | 11.5 | 3.0 |
Available documents
This page was generated from the 4 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.