Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby power | 20 kW |
| Standby kVA | 22 |
| Emissions | C3 |
| Controller | PRP |
| Oil capacity | 2.9 L |
| Alternator | 432 M45 |
| Voltage options | 400 V, 230 V |
| Phase | Three-phase |
| Rated current | 720 A |
| Power factor | 0.8 |
| Circuit breaker | 100 A |
| Battery group | L17 |
| Battery cranking | 500 CCA |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 5.0 L |
| Max ambient | 45 °C |
| Dimensions (L×W×H) | 2080×960×1420 mm |
| Dry weight | 950 kg |
| Sound level | 91.0 dBA @ 1 m |
| Fuel tank | 100.0 L |
| Tank runtime | 230 hr |
Engine
| Oil capacity | 2.9 L |
|---|---|
| Coolant capacity | 5.0 L |
| Displacement | 4.5 L |
| Aspiration | Natural |
| Rated speed | 1500 rpm |
Maintenance & consumables
for the John Deere J200K| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | ISO 8528 | — | 200 hr | ||
| Fuel filter | ISO 8528 | — | 200 hr | ||
| Oil filter | ISO 8528 | — | 200 hr | ||
| Battery | ISO 8528 | — | 200 hr | ||
| Belt | ISO 8528 | — | 200 hr | ||
| Coolant | ISO 8528 | 5.0 l | — | 200 hr | |
| Oil | ISO 8528 | 5.0 l | — | 200 hr | |
| Spark plug | ISO 8528 | — | 200 hr |
Common questions
What is the power rating of the SDMO MONTANA?
The SDMO MONTANA is rated 20 kW standby (22.0 kVA).
What engine is in the SDMO MONTANA?
The SDMO MONTANA is powered by the John Deere J200K engine.
What kind of fuel does the SDMO MONTANA run on?
The SDMO MONTANA runs on Diesel.
What's the oil capacity on a SDMO MONTANA?
The John Deere J200K engine in the SDMO MONTANA has an oil capacity of 2.9 liters.
How much coolant does the SDMO MONTANA hold?
The SDMO MONTANA cooling system holds 5 liters (1.3 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the sound level of the SDMO MONTANA?
The SDMO MONTANA is rated at 91.0 dBA at 1 m, per the manufacturer specification sheet.
How much does the SDMO MONTANA weigh?
The SDMO MONTANA has a dry weight of 950 kg (2094 lb).
How big is the fuel tank on the SDMO MONTANA?
The SDMO MONTANA has a 100 liter (26 US gallon) fuel tank, giving about 230 hours of runtime.
What voltage does the SDMO MONTANA produce?
The SDMO MONTANA is offered in 400 V, 230 V, Three-phase-phase.
What size battery does the SDMO MONTANA need?
The SDMO MONTANA uses 1 battery, 12 V each, 500 CCA, group L17, per the manufacturer specification sheet.
What alternator comes on the SDMO MONTANA?
The SDMO MONTANA uses a 432 M45 alternator.
Parts
4| Part # | Description | Qty | System | |
|---|---|---|---|---|
| CM302/CM403 | Automatik-Paket | 1 | Service part / kit | buy |
| CM307-CM407 | Analoge Anzeige der Werte | 1 | Service part / kit | Amazon eBay |
| EN04 | Pumpe für Ölwechsel | 1 | Service part / kit | Amazon eBay |
| FD05 | Diesel-Vorfilter mit Abscheider | 1 | Service part / kit | Amazon eBay NAPA $103.05 |
Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 75% | 2.5 | 0.66 |
| Standby | 75% | 1.7 | 0.45 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.