Service parts for the ERM600
Grouped by system, with how many of each the parts manual calls for.
Oil system
1 requiredPrices captured from merchant listings; some links are affiliate links. Confirm against your serial number before ordering.
Specifications
| Frequency | 60.0 Hz |
|---|---|
| Standby power | 600 kW |
| Standby kVA | 750 |
| Prime power | 540 kW |
| Emissions | TIER II |
| Oil capacity | 100.0 L |
| Alternator | Stamford/AvK HCI534E |
| Voltage options | 416 V, 480 V, 208 V, 240 V, 240/416 V, 277/480 V, 120/208 V, 138/240 V |
| Dry weight | 7710 kg |
Engine
| Oil capacity | 100.0 L |
|---|---|
| Coolant capacity | 50.0 L |
| Displacement | 24.51 L |
| Aspiration | Turbocharged |
| Rated speed | 1800 rpm |
Same engine, other brands
1 brandThe Mitsubishi S6R-Y2PTAW-1 in this set also powers 1 generator set sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| Kohler | 600REOZM |
Maintenance & consumables
for the Mitsubishi S6R-Y2PTAW-1| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Fuel filter | 2, Cartridge | — | |||
| Oil filter | 3, Cartridge | GM38852 | Amazon eBay $53.27 NAPA $37.54 | ||
| Coolant | 253.0 L | — | |||
| Oil | 100.0 L | — |
Common questions
What is the power rating of the Rudox Power Generation ERM600?
The Rudox Power Generation ERM600 is rated 600 kW standby (750.0 kVA).
What engine does the Rudox Power Generation ERM600 use?
The Rudox Power Generation ERM600 is powered by the Mitsubishi S6R-Y2PTAW-1 engine.
What is the oil capacity of the Rudox Power Generation ERM600?
The Mitsubishi S6R-Y2PTAW-1 engine in the Rudox Power Generation ERM600 has an oil capacity of 100.0 liters.
How much coolant does the Rudox Power Generation ERM600 hold?
The Rudox Power Generation ERM600 cooling system holds 50 liters (13.2 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the Rudox Power Generation ERM600?
The Rudox Power Generation ERM600 is rated 540 kW prime (675 kVA), against 600 kW standby.
What is the dry weight of the Rudox Power Generation ERM600?
The Rudox Power Generation ERM600 has a dry weight of 7710 kg (16998 lb).
What voltages is the Rudox Power Generation ERM600 available in?
The Rudox Power Generation ERM600 is offered in 416 V, 480 V, 208 V, 240 V, 240/416 V, 277/480 V.
Which alternator is fitted to the Rudox Power Generation ERM600?
The Rudox Power Generation ERM600 uses a Stamford/AvK HCI534E alternator.
What oil filter does the Rudox Power Generation ERM600 use?
The Rudox Power Generation ERM600 uses oil filter part number GM38852.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 99.93 | 26.4 |
| Prime | 75% | 141.57 | 37.4 |
| Standby | 100% | 192.3 | 50.8 |
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.