Home›Olympian›Olympian G35F3S

Olympian G35F3S Generator Set

The Olympian G35F3S is a 35 kW (35 kVA) natural gas / LP standby generator set powered by a Ford ESG642 engine. It is available at 120/240 V and 110/220 V, single-phase and 60 Hz. It holds about 5.7 L (6.0 US qt) of oil and 20 L (5.3 gal) of coolant. The set measures 2200×1000×1206 mm (86.6×39.4×47.5 in).

35 kW
Standby
4.2 L
Displacement
5.7 L
Oil capacity
0
Document types

How to read your Olympian serial & model number →

Typical fuel consumption for 35–40 kW Bi-Fuel (NG/LP) generators →

Compare with other 35–40 kW Bi-Fuel (NG/LP) generators →

Specifications

Fuelnatural gas / LP
Frequency60.0 Hz
Standby power35 kW
Standby kVA35
Prime power31.5 kW
Controller2001
Oil capacity5.7 L (6.0 US qt)
Voltage options120/240 V, 110/220 V
Phase1
Power factor1.0
Dimensions (L×W×H)2200×1000×1206 mm
Wet weight720 kg

Engine

Ford ESG642
Oil capacity5.7 L (6.0 US qt)
Coolant capacity20.0 L
Displacement4.2 L
AspirationNatural
Rated speed1800 rpm

Maintenance & consumables

for the Ford ESG642
ItemSpecCapacityPart #Interval
Air filterDry, light duty—
Oil filterSpin-On, Full Flow—
Coolant20.0 L—
Oil5.7 L (6.0 US qt)—

Recommended fluids

FluidGradeStandardAmbientCapacityNotes
Engine oilAPI CF-45.7 L

Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.

Common questions

What is the power rating of the Olympian G35F3S?

The Olympian G35F3S is rated 35 kW standby (35.0 kVA).

Which engine powers the Olympian G35F3S?

The Olympian G35F3S is powered by the Ford ESG642 engine.

What kind of fuel does the Olympian G35F3S run on?

The Olympian G35F3S runs on natural gas / LP.

How much oil does the Olympian G35F3S take?

The Olympian G35F3S takes 5.7 L (6.0 US qt) of engine oil, per Olympian-G35F3S-spec-sheet.

What is the coolant capacity of the Olympian G35F3S?

The Olympian G35F3S cooling system holds 20 liters (5.3 US gallons) for the engine, per the manufacturer specification sheet.

What is the continuous rating of the Olympian G35F3S?

The Olympian G35F3S is rated 31.5 kW prime (31 kVA), against 35 kW standby.

What voltage does the Olympian G35F3S produce?

The Olympian G35F3S is offered in 120/240 V, 110/220 V, 1-phase.

Installation data

Figures an installer sizes exhaust piping and room ventilation from, as printed on the Olympian G35F3S data sheet (standby rating where the sheet gives several).

Maximum exhaust back pressure4.5 in Hg (15.3 kPa)

Source — Olympian-G35F3S-spec-sheet.

Available documents

Spec sheet — Olympian-G35F3S-spec-sheet (Caterpillar)Reference (Caterpillar)

This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.