Specifications
| Frequency | 50.0 Hz |
|---|---|
| Standby power | 483 kW |
| Prime power | 440 kW |
| Oil capacity | 8.0 L |
| Voltage options | 24 V |
| Dry weight | 1800 kg |
Engine
| Oil capacity | 8.0 L |
|---|---|
| Coolant capacity | 40.0 L |
| Displacement | 18.0 L |
| Aspiration | Four-Cycled water cooled, turbocharged with air cooler |
| Rated speed | 1500 rpm |
Filters for the Mitsubishi S 6A3-PTAA
1Engine-mounted filters the filter manufacturers list for this engine family. These come from the engine, not from this generator set’s own parts list, so confirm against your serial number before ordering.
Listed for this engine in only one kind of machine, so they may depend on how the engine was installed:
| System | Filter | Description | Cross-references | |
|---|---|---|---|---|
| Fuel filter | P552251 | Fuel Filter, Spin-On | MITSUBISHI 3256260300, MITSUBISHI 3256260300E, NAPA 3239, BALDWIN BF984 | buy |
Filters & service parts
model family| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Refer to table | — | |||
| Fuel filter | Paper element type | — | |||
| Oil filter | Full flow paper element type | — | |||
| Battery | Double ball bearing for MG-P80S12 & MG-L52UL16, Single ball bearing Note 1 | — | |||
| Belt | Refer to table | — | |||
| Coolant | refer to Operation & Maintenance manual | — | |||
| Oil | refer to Operation & Maintenance manual | 100.0 liter | — | ||
| Spark plug | — |
Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.
Common questions
What is the power rating of the Mitsubishi S6A3-PTAA?
The Mitsubishi S6A3-PTAA is rated 483 kW standby.
What engine is in the Mitsubishi S6A3-PTAA?
The Mitsubishi S6A3-PTAA is powered by the Mitsubishi S 6A3-PTAA engine.
What is the oil capacity of the Mitsubishi S6A3-PTAA?
The Mitsubishi S 6A3-PTAA engine in the Mitsubishi S6A3-PTAA has an oil capacity of 8.0 liters.
What is the cooling system capacity of the Mitsubishi S6A3-PTAA?
The Mitsubishi S6A3-PTAA cooling system holds 40 liters (10.6 US gallons) for the engine, per the manufacturer specification sheet.
What is the continuous rating of the Mitsubishi S6A3-PTAA?
The Mitsubishi S6A3-PTAA is rated 440 kW prime, against 483 kW standby.
How much does the Mitsubishi S6A3-PTAA weigh?
The Mitsubishi S6A3-PTAA has a dry weight of 1800 kg (3968 lb).
What voltage does the Mitsubishi S6A3-PTAA produce?
The Mitsubishi S6A3-PTAA is offered in 24 V.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 50% | 211.0 | 55.74 |
| Prime | 75% | 207.0 | 54.68 |
| Prime | 100% | 208.0 | 54.95 |
Available documents
This page was generated from the 7 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.