Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 225 kW |
| Standby kVA | 281 |
| Emissions | Tier 3 |
| Controller | Digital auto-start microprocessor based |
| Oil capacity | 25.8 L |
| Alternator | Stamford/AvK HC444D - UCDI 274 J (347/600V) |
| Voltage options | 120/208 V, 277/480 V, 347/600 V |
| Phase | 3 |
| Rated current | 1200 A |
| Power factor | 0.8 |
| Circuit breaker | 1200 A |
| Battery group | 2 x 185 amps |
| Battery cranking | 800 CCA |
| Battery voltage | 24 V |
| Battery quantity | 2 |
| Coolant capacity | 63.0 L |
| Sound level | 72.0 dBA |
Engine
| Oil capacity | 25.8 L |
|---|---|
| Coolant capacity | 63.0 L |
| Displacement | 8.7 L |
| Aspiration | TAA |
| Rated speed | 1800 rpm |
Maintenance & consumables
for the Iveco/FPT C87TE1D| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | Medium duty - double cartridge | — | 1000 hr | ||
| Fuel filter | Standard | — | 1000 hr | ||
| Oil filter | Medium duty - double cartridge | — | 1000 hr | ||
| Battery | 2 x 185 amps | — | 1000 hr | ||
| Belt | N/A | — | 1000 hr | ||
| Coolant | Liquid | 63.0 liters | — | 1000 hr | |
| Oil | Liquid | 25.8 liters | — | 1000 hr | |
| Spark plug | N/A | — | 1000 hr |
Common questions
How many kW is the Iveco/FPT HFW 250 T6U?
The Iveco/FPT HFW 250 T6U is rated 225 kW standby (281.0 kVA).
What engine is in the Iveco/FPT HFW 250 T6U?
The Iveco/FPT HFW 250 T6U is powered by the Iveco/FPT C87TE1D engine.
What kind of fuel does the Iveco/FPT HFW 250 T6U run on?
The Iveco/FPT HFW 250 T6U runs on Diesel.
What's the oil capacity on a Iveco/FPT HFW 250 T6U?
The Iveco/FPT C87TE1D engine in the Iveco/FPT HFW 250 T6U has an oil capacity of 25.8 liters.
How much coolant does the Iveco/FPT HFW 250 T6U hold?
The Iveco/FPT HFW 250 T6U cooling system holds 63 liters (16.6 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the sound level of the Iveco/FPT HFW 250 T6U?
The Iveco/FPT HFW 250 T6U is rated at 72.0 dBA, per the manufacturer specification sheet.
What voltages is the Iveco/FPT HFW 250 T6U available in?
The Iveco/FPT HFW 250 T6U is offered in 120/208 V, 277/480 V, 347/600 V, 3-phase.
What battery does the Iveco/FPT HFW 250 T6U use?
The Iveco/FPT HFW 250 T6U uses 2 batteryies, 24 V each, 800 CCA, group 2 x 185 amps, per the manufacturer specification sheet.
What alternator does the Iveco/FPT HFW 250 T6U use?
The Iveco/FPT HFW 250 T6U uses a Stamford/AvK HC444D - UCDI 274 J (347/600V) alternator.
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.