Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 50.0 Hz |
| Standby kVA | 440 |
| Emissions | Stage II |
| Oil capacity | 35.0 L |
Engine
| Oil capacity | 35.0 L |
|---|---|
| Coolant capacity | 68.0 L |
| Displacement | 12.9 L |
| Aspiration | TAA |
| Rated speed | 1500 rpm |
Filters & service parts
model family| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Oil | — | 800 hr |
Compiled from this model's family documentation — may include parts for closely-related variants. Confirm the exact part for your serial number.
Service intervals
1| Item | Action | Hours | Months | Notes |
|---|---|---|---|---|
| Engine oil | Change | 800 hr | NEF Series mechanical engines: up to 800h oil interval change |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Recommended fluids
| Fluid | Grade | Standard | Ambient | Capacity | Notes |
|---|---|---|---|---|---|
| Fuel | Diesel | Standard and alternative fuels consistent |
Extracted from the manufacturer documentation linked to this model. Values are copied as printed; confirm against your unit's manual and serial number.
Common questions
Which engine powers the Iveco/FPT GS CURSOR400?
The Iveco/FPT GS CURSOR400 is powered by the Iveco/FPT C13TE3A engine.
Is the Iveco/FPT GS CURSOR400 diesel or gas?
The Iveco/FPT GS CURSOR400 runs on Diesel.
What is the oil capacity of the Iveco/FPT GS CURSOR400?
The Iveco/FPT C13TE3A engine in the Iveco/FPT GS CURSOR400 has an oil capacity of 35.0 liters.
How much coolant does the Iveco/FPT GS CURSOR400 hold?
The Iveco/FPT GS CURSOR400 cooling system holds 68 liters (18.0 US gallons) for the engine, per the manufacturer specification sheet.
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.