Specifications
| Fuel | natural gas / LPG |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 150 kW |
| Standby kVA | 188 |
| Prime power | 135 kW |
| Controller | DSE7310 |
| Oil capacity | 8.5 L |
| Alternator | Marathon 431PSL6202 (4-pole, Class H insulation) |
| Voltage options | 120/208 V, 120/240 V, 277/480 V, 347/600 V |
| Phase | 3 |
| Power factor | 0.8 |
| Battery group | BCI 27F |
| Battery cranking | 700 CCA |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 39.2 L |
| Dimensions (L×W×H) | 3505×1372×1651 mm |
| Dry weight | 2635 kg |
| Sound level | 77.0 dBA @ 7 m |
Engine
| Oil capacity | 8.5 L |
|---|---|
| Coolant capacity | 39.2 L |
| Displacement | 8.8 L |
| Aspiration | turbocharged and charge air cooled |
| Rated speed | 1800 rpm |
Same engine, other brands
1 brandThe Power Solutions International 8.8LT CAC in this set also powers 1 generator set sold under 1 other brand. Service parts and maintenance intervals for the engine are shared; enclosure, alternator, controller and ratings are not.
| Brand | Models |
|---|---|
| MTU | 8V0110 GS150 |
Maintenance & consumables
for the Power Solutions International 8.8LT CAC| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | dry, replaceable cartridge | — | |||
| Oil filter | 1, replaceable spin-on | — | |||
| Coolant | radiator system capacity including engine | 39.2 L | — | ||
| Oil | SAE 10W-30 above 0F (SAE 5W-30 below 0F) | 8.5 L | — | ||
| Spark plug | spark ignition (PSI Vortec gaseous engine) | — |
Common questions
How many kW is the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U is rated 150 kW standby (188.0 kVA).
What engine is in the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U is powered by the Power Solutions International 8.8LT CAC engine.
What kind of fuel does the Hipower HGM 150 T6U run on?
The Hipower HGM 150 T6U runs on natural gas / LPG.
What's the oil capacity on a Hipower HGM 150 T6U?
The Power Solutions International 8.8LT CAC engine in the Hipower HGM 150 T6U has an oil capacity of 8.5 liters.
What is the cooling system capacity of the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U cooling system holds 39.2 liters (10.4 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U is rated 135 kW prime (169 kVA), against 150 kW standby.
What is the sound level of the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U is rated at 77.0 dBA at 7 m, per the manufacturer specification sheet.
What is the dry weight of the Hipower HGM 150 T6U?
The Hipower HGM 150 T6U has a dry weight of 2635 kg (5809 lb).
What voltage does the Hipower HGM 150 T6U produce?
The Hipower HGM 150 T6U is offered in 120/208 V, 120/240 V, 277/480 V, 347/600 V, 3-phase.
How many cold cranking amps does the Hipower HGM 150 T6U require?
The Hipower HGM 150 T6U uses 1 battery, 12 V each, 700 CCA, group BCI 27F, per the manufacturer specification sheet.
What alternator does the Hipower HGM 150 T6U use?
The Hipower HGM 150 T6U uses a Marathon 431PSL6202 alternator. It has 4 poles. Insulation class H.
Available documents
This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.