HomeGenmacGenmac HSD12

Genmac HSD12 Generator Set

The Genmac HSD12 is a 10.8 kW (10.8 kVA) NATURAL GAS standby generator set powered by a Kohler CH25 engine. It is available at 120 V, single-phase, 60 Hz and rated 90 A. The set measures 1105×538×927 mm (43.5×21.2×36.5 in), weighs about 310 kg (683 lb) and produces 63 dBA at 7 m. The same CH25 engine also powers generator sets from Cummins/Onan.

10 kW
Standby
0.725 L
Displacement
1
Document types

Typical fuel consumption for 10–15 kW Natural Gas generators →

Compare with other 10–15 kW Natural Gas generators →

Specifications

FuelNATURAL GAS
Frequency60.0 Hz
Standby power10 kW
Standby kVA10
Prime power9 kW
Voltage options120 V, 240 V
Phasesingle
Rated current90 A
Circuit breaker90 A
Dimensions (L×W×H)1105×538×927 mm
Dry weight310 kg
Sound level63.0 dBA @ 7 m

Engine

Kohler CH25
Displacement0.725 L
Aspirationnatural
Rated speed3600 rpm

Maintenance & consumables

for the Kohler CH25
ItemSpecCapacityPart #Interval
Air filterair filter500 hr
Fuel filterfuel filter300 hr
Oil filterengine oil filter100 hr
Batterybattery
Belt
Coolantautomotive antifreeze coolant
Oilengine oil100 hr
Spark plugspark plug

Common questions

What size generator is the Genmac HSD12?

The Genmac HSD12 is rated 10 kW standby (10.8 kVA).

What engine is in the Genmac HSD12?

The Genmac HSD12 is powered by the Kohler CH25 engine.

What fuel does the Genmac HSD12 use?

The Genmac HSD12 runs on NATURAL GAS.

Troubleshooting

4

Symptoms & remedies

SymptomCauseRemedy
Battery Supply Voltage (12 VDC) is not normal1. DC battery power not connected. Check for blown fuse. 2. Low battery voltage. 3. Wiring error.
Speed trim value is abnormal1. Speed trim shorted or miswired.
Gap between speed sensor and gear teeth is too great1. Gap between speed sensor and gear teeth too great. 2. Improper or defective wiring to the speed sensor.Check gap.
Defective speed sensor3. Defective speed sensor

Fault codes and symptom→remedy steps extracted from this model’s service/owner documentation; verify against the official manual before servicing.

Parts

20
Part #DescriptionQtySystem
12 050 01Oil filter1Oil filter Amazon $30.38 eBay KuduParts $11.00
12 050 01-SFilter, oil40Filter Amazon $30.38 eBay KuduParts $32.00
12 132 02Spark plug1Spark plug buy
12 132 02-SSpark plug2Spark plug buy
24 050 01-SFilter, breather8Filter buy
24 083 02Precleaner element1Air filter buy
24 083 08Air cleaner element1Air filter buy
24 083 08-SElement, air filter1Air filter buy
24 083 09-SElement, air filter1Air filter buy
241927Sensor, speed1Sensor Amazon eBay
25 132 14-SSpark plug (RFI)2Spark plug buy
269373Alternator Assembly5Alternator Amazon eBay
GM28823Sensor, oil temperature1Sensor Amazon eBay $50.00
223316Fuse, 10 A, 250 V1Service part / kit Amazon $171.06 eBay $31.37
24 083 02-SPre-cleaner8Service part / kit buy
24 083 05-SPre-cleaner8Service part / kit buy
292937Fuse, 20 A, 250 V1Service part / kit Amazon eBay $31.78
F-228605Kit, voltage regulator1Service part / kit Amazon eBay $539.95
GM10064PCB assembly (relay controller)1Service part / kit Amazon eBay $337.95
GM29671PCB assy, relay board 12V1Service part / kit Amazon eBay

Service, wear & replacement parts referenced for this model and its engine — confirm the exact part for your serial number. See the full parts catalog to search and cross-reference.

Fuel consumption

RatingLoadL/hgal/h
Prime100%1.97.2
Standby100%1.14.2

Available documents

Owner's manual — Elliott HSB 12-22kW OM 2004 (Genmac)
Other sets with this engine