Specifications
| Fuel | Natural Gas |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 1000 kW |
| Standby kVA | 1250 |
| Prime power | 900 kW |
| Emissions | EPA Certified |
| Controller | PowerZone Pro Sync |
| Oil capacity | 270.0 L |
| Alternator | K1248064N22 (4-pole, Class H insulation) |
| Voltage options | 277/480 V, 346/600 V |
| Phase | Three-Phase |
| Rated current | 1505 A |
| Power factor | 0.8 |
| Circuit breaker | 1505 A |
| Battery group | See Battery Index 0161970SBY |
| Battery voltage | 12 VDC V |
| Battery quantity | 4 |
| Coolant capacity | 303.0 L |
| Max ambient | 50 °C |
| Dimensions (L×W×H) | 5597×2590×3369 mm |
| Dry weight | 9717 kg |
| Tank runtime | N/A hr |
Engine
| Oil capacity | 270.0 L |
|---|---|
| Coolant capacity | 303.0 L |
| Displacement | 49.03 L |
| Aspiration | Turbocharged/Aftercooled |
| Rated speed | 1800 rpm |
Common questions
What is the power rating of the Generac SG1000?
The Generac SG1000 is rated 1000 kW standby (1250.0 kVA).
What engine does the Generac SG1000 use?
The Generac SG1000 is powered by the Generac SG1000 engine.
What fuel does the Generac SG1000 use?
The Generac SG1000 runs on Natural Gas.
What is the oil capacity of the Generac SG1000?
The Generac SG1000 engine in the Generac SG1000 has an oil capacity of 270.0 liters.
What is the coolant capacity of the Generac SG1000?
The Generac SG1000 cooling system holds 303 liters (80.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the prime power rating of the Generac SG1000?
The Generac SG1000 is rated 900 kW prime (1125 kVA), against 1000 kW standby.
How much does the Generac SG1000 weigh?
The Generac SG1000 has a dry weight of 9717 kg (21422 lb).
What voltages is the Generac SG1000 available in?
The Generac SG1000 is offered in 277/480 V, 346/600 V, Three-Phase-phase.
How many cold cranking amps does the Generac SG1000 require?
The Generac SG1000 uses 4 batteryies, 12 VDC V each, group See Battery Index 0161970SBY, per the manufacturer specification sheet.
What alternator comes on the Generac SG1000?
The Generac SG1000 uses a K1248064N22 alternator. It has 4 poles. Insulation class H.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 25% | 100.2 | 3.0 |
| Standby | 50% | 157.8 | 4.0 |
| Standby | 75% | 215.3 | 4.0 |
| Standby | 100% | 272.5 | 9.0 |
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.