Specifications
| Fuel | Natural Gas, Propane Vapor |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 70 kW |
| Standby kVA | 88 |
| Prime power | 63 kW |
| Emissions | EPA Certified |
| Controller | Digital H Control Panel - Dual 4x20 Display |
| Oil capacity | 5.7 L |
| Alternator | 390 (Class NEMA MG1-32.6, NEMA MG1-1.66 insulation) |
| Voltage options | 120/240 V, 120/208 V, 277/480 V, 346/600 V |
| Phase | 3 |
| Rated current | 292 A |
| Power factor | 0.8 |
| Circuit breaker | 292 A |
| Battery group | 1 |
| Battery voltage | 12 V |
| Battery quantity | 1 |
| Coolant capacity | 6.3 L |
| Max ambient | 40 °C |
| Dimensions (L×W×H) | 2360×1015×1914 mm |
| Dry weight | 875 kg |
| Fuel tank | 0.0 L |
| Tank runtime | 0 hr |
Engine
| Oil capacity | 6.0 L |
|---|---|
| Coolant capacity | 6.0 L |
| Displacement | 6.8 L |
| Aspiration | Naturally Aspirated |
| Rated speed | 3000 rpm |
Maintenance & consumables
for the Generac 6.8GN| Item | Spec | Capacity | Part # | Interval | |
|---|---|---|---|---|---|
| Air filter | — | ||||
| Fuel filter | — | ||||
| Oil filter | — | ||||
| Battery | (1) - 12 V, 90 A.H., 27F | — | |||
| Belt | — | ||||
| Coolant | — | ||||
| Coolant filter | — | ||||
| Oil | — | ||||
| Spark plug | — |
Common questions
How many kW is the Generac SG070?
The Generac SG070 is rated 70 kW standby (88.0 kVA).
What engine does the Generac SG070 use?
The Generac SG070 is powered by the Generac 6.8GN engine.
What kind of fuel does the Generac SG070 run on?
The Generac SG070 runs on Natural Gas, Propane Vapor.
How much oil does the Generac SG070 take?
The Generac 6.8GN engine in the Generac SG070 has an oil capacity of 6.0 liters.
What is the cooling system capacity of the Generac SG070?
The Generac SG070 cooling system holds 6.3 liters (1.7 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the continuous rating of the Generac SG070?
The Generac SG070 is rated 63 kW prime (79 kVA), against 70 kW standby.
How much does the Generac SG070 weigh?
The Generac SG070 has a dry weight of 875 kg (1929 lb).
What voltages is the Generac SG070 available in?
The Generac SG070 is offered in 120/240 V, 120/208 V, 277/480 V, 346/600 V, 3-phase.
How many cold cranking amps does the Generac SG070 require?
The Generac SG070 uses 1 battery, 12 V each, group 1, per the manufacturer specification sheet.
Which alternator is fitted to the Generac SG070?
The Generac SG070 uses a 390 alternator. Insulation class NEMA MG1-32.6, NEMA MG1-1.66.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 110% | 56.0 | 56.0 |
| Standby | 25% | 353.0 | 10.0 |
| Standby | 50% | 605.0 | 17.1 |
| Standby | 75% | 1009.0 | 28.6 |
| Standby | 100% | 1009.0 | 28.6 |
Available documents
This page was generated from the 3 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.