Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 600 kW |
| Standby kVA | 750 |
| Prime power | 525 kW |
| Emissions | EPA Certified Stationary Emergency |
| Controller | PowerManager Digital Platform (PM-DCP) |
| Oil capacity | 60.0 L |
| Alternator | WEG Standard |
| Voltage options | 120/208 V, 120/240 V, 277/480 V, 346/600 V |
| Phase | Three-Phase |
| Rated current | 2081 A |
| Power factor | 0.8 |
| Circuit breaker | 2081 A |
| Battery group | 8D |
| Battery cranking | 1155 CCA |
| Battery voltage | 24 V |
| Battery quantity | 2 |
| Coolant capacity | 49 L |
| Max ambient | 40 °C |
| Dry weight | 4706 kg |
| Sound level | 75.0 dBA @ null m |
| Fuel tank | 1001.0 L |
| Tank runtime | null hr |
Engine
| Oil capacity | 42.0 L |
|---|---|
| Coolant capacity | 95.0 L |
| Displacement | 22.0 L |
| Aspiration | Turbocharged/Aftercooled |
Common questions
What is the power rating of the Generac SD600?
The Generac SD600 is rated 600 kW standby (750.0 kVA).
Which engine powers the Generac SD600?
The Generac SD600 is powered by the Doosan p222Fe/6DWXL21.9UYA engine.
Is the Generac SD600 diesel or gas?
The Generac SD600 runs on Diesel.
What's the oil capacity on a Generac SD600?
The Doosan p222Fe/6DWXL21.9UYA engine in the Generac SD600 has an oil capacity of 42.0 liters.
How much coolant does the Generac SD600 hold?
The Generac SD600 cooling system holds 49 liters (12.9 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
What is the continuous rating of the Generac SD600?
The Generac SD600 is rated 525 kW prime (590 kVA), against 600 kW standby.
What is the sound level of the Generac SD600?
The Generac SD600 is rated at 75.0 dBA at null m, per the manufacturer specification sheet.
How much does the Generac SD600 weigh?
The Generac SD600 has a dry weight of 4706 kg (10374 lb).
What size fuel tank does the Generac SD600 have?
The Generac SD600 has a 1001 liter (264 US gallon) fuel tank, giving about null hours of runtime.
What voltage does the Generac SD600 produce?
The Generac SD600 is offered in 120/208 V, 120/240 V, 277/480 V, 346/600 V, Three-Phase-phase.
How many cold cranking amps does the Generac SD600 require?
The Generac SD600 uses 2 batteryies, 24 V each, 1155 CCA, group 8D, per the manufacturer specification sheet.
Which alternator is fitted to the Generac SD600?
The Generac SD600 uses a WEG Standard alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Standby | 25% | 69.7 | 18.4 |
| Standby | 50% | 88.7 | 28.2 |
| Standby | 75% | 134.8 | 35.6 |
| Standby | 100% | 156.7 | 41.4 |
Available documents
This page was generated from the 2 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.