Specifications
| Fuel | Diesel |
|---|---|
| Frequency | 60.0 Hz |
| Standby power | 230 kW |
| Standby kVA | 230 |
| Prime power | 230 kW |
| Emissions | EPA Certified |
| Controller | Digital H Control Panel - Dual 4x20 Display |
| Oil capacity | 28.0 L |
| Alternator | Series 60, 4-Cycle |
| Voltage options | 230 V |
| Phase | Single |
| Rated current | 799 A |
| Power factor | 0.8 |
| Circuit breaker | 958 A |
| Battery group | 90 |
| Battery cranking | 1200 CCA |
| Battery voltage | 24VDC V |
| Battery quantity | 2 |
| Coolant capacity | 53.4 L |
| Max ambient | 70 °C |
| Dimensions (L×W×H) | 154×53×68 mm |
| Dry weight | 5016 kg |
| Sound level | 128.0 dBA @ 23 m |
| Fuel tank | 87.0 L |
| Tank runtime | 100% hr |
Engine
| Oil capacity | 28.0 L |
|---|---|
| Coolant capacity | 49.2 L |
| Displacement | 8.7 L |
| Aspiration | Turbocharged/Aftercooled |
| Rated speed | 1424 rpm |
Common questions
How many kW is the Generac SD230?
The Generac SD230 is rated 230 kW standby (230.0 kVA).
Which engine powers the Generac SD230?
The Generac SD230 is powered by the Iveco/FPT N/A engine.
What kind of fuel does the Generac SD230 run on?
The Generac SD230 runs on Diesel.
What's the oil capacity on a Generac SD230?
The Iveco/FPT N/A engine in the Generac SD230 has an oil capacity of 28.0 liters.
What is the cooling system capacity of the Generac SD230?
The Generac SD230 cooling system holds 53.4 liters (14.1 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.
How loud is the Generac SD230?
The Generac SD230 is rated at 128.0 dBA at 23 m, per the manufacturer specification sheet.
How much does the Generac SD230 weigh?
The Generac SD230 has a dry weight of 5016 kg (11058 lb).
How big is the fuel tank on the Generac SD230?
The Generac SD230 has a 87 liter (23 US gallon) fuel tank, giving about 100% hours of runtime.
What voltage does the Generac SD230 produce?
The Generac SD230 is offered in 230 V, Single-phase.
How many cold cranking amps does the Generac SD230 require?
The Generac SD230 uses 2 batteryies, 24VDC V each, 1200 CCA, group 90, per the manufacturer specification sheet.
What alternator comes on the Generac SD230?
The Generac SD230 uses a Series 60, 4-Cycle alternator.
Fuel consumption
| Rating | Load | L/h | gal/h |
|---|---|---|---|
| Prime | 25% | 17.8 | 4.7 |
| Prime | 50% | 33.3 | 8.8 |
| Prime | 75% | 47.7 | 12.6 |
| Prime | 80% | 17.8 | 4.7 |
| Prime | 100% | 59.0 | 15.6 |
| Standby | 25% | 5.1 | 19.3 |
| Standby | 50% | 9.6 | 36.3 |
| Standby | 70% | 19.3 | 5.1 |
| Standby | 75% | 13.7 | 51.9 |
| Standby | 100% | 17.0 | 64.3 |
Available documents
This page was generated from the 7 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.