Home›Generac›Generac MD600

Generac MD600 Generator Set

The Generac MD600 is a 600 kW (1765 kVA) Diesel standby generator set powered by a Doosan P222LE engine. It is available at 277/480 V, 3-phase, 60 Hz and rated 903 A. It holds about 42 L (11.1 gal) of oil and 131 L (34.6 gal) of coolant, with a maximum ambient rating of 43.4 °C. Starting uses 2 group-2 batteries rated 1155 CCA at 24 V. The set measures 7598×5710×8410 mm (299.1×224.8×331.1 in), weighs about 9420 kg (20768 lb) and produces 8 dBA at 23 m. The same P222LE engine also powers generator sets from Doosan.

600 kW
Standby
0.21927 L
Displacement
42.0 L
Oil capacity
2
Document types

How to read your Generac serial & model number →

Typical fuel consumption for 600–605 kW Diesel generators →

Compare with other 600–605 kW Diesel generators →

Specifications

FuelDiesel
Frequency60.0 Hz
Standby power600 kW
Standby kVA1765
Prime power525 kW
EmissionsStationary Emergency
ControllerPower Manager System, PowerManager Generator
Oil capacity42.0 L
AlternatorMarathon 572RSL4028
Voltage options277/480 V
Phase3
Rated current903 A
Power factor0.8
Circuit breaker1000 A
Battery group2 x 12V
Battery cranking1155 CCA
Battery voltage24 V
Battery quantity2
Coolant capacity131 L
Max ambient43.4 °C
Dimensions (L×W×H)7598×5710×8410 mm
Dry weight9420 kg

Engine

Doosan P222LE
Displacement0.21927 L
AspirationTurbocharged and intercooled
Rated speed1800 rpm

Common questions

What is the power rating of the Generac MD600?

The Generac MD600 is rated 600 kW standby (1765.0 kVA).

What engine does the Generac MD600 use?

The Generac MD600 is powered by the Doosan P222LE engine.

What kind of fuel does the Generac MD600 run on?

The Generac MD600 runs on Diesel.

What is the coolant capacity of the Generac MD600?

The Generac MD600 cooling system holds 131 liters (34.6 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the oil capacity of the Generac MD600?

The Generac MD600 has an engine oil capacity of 42 liters (44.4 US quarts), per the manufacturer specification sheet.

What is the continuous rating of the Generac MD600?

The Generac MD600 is rated 525 kW prime (1765 kVA), against 600 kW standby.

What is the dry weight of the Generac MD600?

The Generac MD600 has a dry weight of 9420 kg (20767 lb).

What voltage does the Generac MD600 produce?

The Generac MD600 is offered in 277/480 V, 3-phase.

What size battery does the Generac MD600 need?

The Generac MD600 uses 2 batteryies, 24 V each, 1155 CCA, group 2 x 12V, per the manufacturer specification sheet.

What alternator does the Generac MD600 use?

The Generac MD600 uses a Marathon 572RSL4028 alternator.

Fuel consumption

RatingLoadL/hgal/h
Prime25%14.153.43
Prime50%21.179.1
Prime75%32.3122.4
Prime100%42.1159.6
Prime130%8.833.0
Prime260%17.767.0
Prime395%26.599.0
Prime525%35.3131.0
Standby40.4149.0
Standby25%69.718.4
Standby50%88.728.2
Standby75%134.835.6
Standby100%156.741.4
Standby150%10.139.0
Standby300%20.278.0
Standby450%30.3115.0

Available documents

Spec sheet — 0184720SBY (Generac)Reference — 0165270SBY (Generac)Reference — 0168810SBY (Generac)Reference — 0179860SBY (Generac)Reference — 0179860sby-stockton-water-case-study (Generac)Reference — 0197230sby-a-md600-18-1l-perkins (Generac)Reference — Generac-Industrial-Power Case-Study Stockton-California-Wastewater-Treatment-Facility (Generac)

This page was generated from the 7 manufacturer documents above by automated extraction; every figure shown is copied from one of them. How the data is compiled.

Other sets with this engine