Home›Generac›Generac Home Standby - 40

Generac Home Standby - 40 Generator Set

The Generac Home Standby - 40 is a 40 kW LP standby generator set powered by a Generac 3.9 GN engine. It is available at 120/240 V, single-phase and 60 Hz. It holds about 4.25 L (1.1 gal) of oil and 21.2 L (5.6 gal) of coolant, with a maximum ambient rating of 48.89 °C. Starting uses 1 group-27 battery at 12 V. The set weighs about 635.03 kg (1400 lb).

40 kW
Standby
3.9 L
Displacement
4.25 L
Oil capacity
1
Document types

How to read your Generac serial & model number →

Specifications

FuelLP
Frequency60.0 Hz
Standby power40 kW
Prime power32 kW
ControllerHome Standby Microprocessor Controls
Oil capacity4.25 L
Voltage options120/240 V
Phase1-phase
Power factor1
Circuit breaker200 A
Battery group27F
Battery voltage12 V
Battery quantity1
Coolant capacity21.2 L
Max ambient48.89 °C
Dry weight635 kg

Engine

Generac 3.9 GN
Oil capacity4.55 L
Coolant capacity5.6 L
Displacement3.9 L
AspirationNaturally Aspirated
Rated speed1800 rpm

Maintenance & consumables

for the Generac 3.9 GN
ItemSpecCapacityPart #Interval
Oil filterFull flow, cartridge—
OilGear—

Common questions

What size generator is the Generac Home Standby - 40?

The Generac Home Standby - 40 is rated 40 kW standby.

What engine does the Generac Home Standby - 40 use?

The Generac Home Standby - 40 is powered by the Generac 3.9 GN engine.

What fuel type does the Generac Home Standby - 40 take?

The Generac Home Standby - 40 runs on LP.

What is the oil capacity of the Generac Home Standby - 40?

The Generac 3.9 GN engine in the Generac Home Standby - 40 has an oil capacity of 4.55 liters.

How much coolant does the Generac Home Standby - 40 hold?

The Generac Home Standby - 40 cooling system holds 21.2 liters (5.6 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the continuous rating of the Generac Home Standby - 40?

The Generac Home Standby - 40 is rated 32 kW prime, against 40 kW standby.

How much does the Generac Home Standby - 40 weigh?

The Generac Home Standby - 40 has a dry weight of 635 kg (1399 lb).

What voltages is the Generac Home Standby - 40 available in?

The Generac Home Standby - 40 is offered in 120/240 V, 1-phase-phase.

What battery does the Generac Home Standby - 40 use?

The Generac Home Standby - 40 uses 1 battery, 12 V each, group 27F, per the manufacturer specification sheet.

Fuel consumption

RatingLoadL/hgal/h
Prime100%18.174.8
Standby100%22.335.9

Available documents

Spec sheet — 0E91950SVE (Generac)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.

Other sets with this engine