Home›Generac›Generac Home Standby - 30

Generac Home Standby - 30 Generator Set

The Generac Home Standby - 30 is a 30 kW LP standby generator set powered by a Generac 3.0GN engine. It is available at 120/240 V, single-phase, 60 Hz and rated 250 A. It holds about 4.73 L (1.2 gal) of oil and 11.36 L (3.0 gal) of coolant, with a maximum ambient rating of 48.89 °C. Starting uses 1 group-27 battery at 12 V. The set measures 1933.8×850×1071.4 mm (76.1×33.5×42.2 in) and weighs about 612 kg (1349 lb).

30 kW
Standby
3.0 L
Displacement
4.73 L
Oil capacity
1
Document types

How to read your Generac serial & model number →

Compare with other 30–35 kW Propane/LPG generators →

Specifications

FuelLP
Frequency60.0 Hz
Standby power30 kW
Prime power24 kW
Oil capacity4.73 L
Voltage options120/240 V
Phase1-phase
Rated current250 A
Power factor1
Circuit breaker150 A
Battery group27F
Battery voltage12 V
Battery quantity1
Coolant capacity11.36 L
Max ambient48.89 °C
Dimensions (L×W×H)1933×850×1071 mm
Dry weight612 kg

Engine

Generac 3.0GN
Oil capacity4.73 L
Coolant capacity11.36 L
Displacement3.0 L
AspirationNaturally Aspirated
Rated speed1800 rpm

Common questions

What size generator is the Generac Home Standby - 30?

The Generac Home Standby - 30 is rated 30 kW standby.

Which engine powers the Generac Home Standby - 30?

The Generac Home Standby - 30 is powered by the Generac 3.0GN engine.

What fuel type does the Generac Home Standby - 30 take?

The Generac Home Standby - 30 runs on LP.

How much oil does the Generac Home Standby - 30 take?

The Generac 3.0GN engine in the Generac Home Standby - 30 has an oil capacity of 4.73 liters.

How much coolant does the Generac Home Standby - 30 hold?

The Generac Home Standby - 30 cooling system holds 11.36 liters (3.0 US gallons) for the radiator system including the engine, per the manufacturer specification sheet.

What is the prime power rating of the Generac Home Standby - 30?

The Generac Home Standby - 30 is rated 24 kW prime, against 30 kW standby.

How much does the Generac Home Standby - 30 weigh?

The Generac Home Standby - 30 has a dry weight of 612 kg (1349 lb).

What voltages is the Generac Home Standby - 30 available in?

The Generac Home Standby - 30 is offered in 120/240 V, 1-phase-phase.

How many cold cranking amps does the Generac Home Standby - 30 require?

The Generac Home Standby - 30 uses 1 battery, 12 V each, group 27F, per the manufacturer specification sheet.

Fuel consumption

RatingLoadL/hgal/h
Standby100%16.664.4

Available documents

Spec sheet — 30kW3.0L9.04 (Generac)

This page was generated from the 1 manufacturer document above by automated extraction; every figure shown is copied from one of them. How the data is compiled.